Bestsellers

GMS brake line holder, 3D printing, flexible filament

The holder was designed to optimally attach brake lines to any fork or other tubes.
The holder and brake line are each attached with a separate cable tie.

Suitable for steel flex brake lines from HEL Performance
Use on lines and cables from other manufacturers may need to be tested.

Scope of delivery: 1 x holder
Material: Plastic (3D print)

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® double nipple with external thread M10x1.00 - M10x1.00 VA

Connecting nipple with sealing cone. One side convex, other side concave. Width across flats 12mm

Scope of delivery: 1 x double nipple, M10x1.00/M10x1.00, SW12mm
Material: Stainless steel

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® 2-Piston CNC Brake Caliper, Axial, 84 mm, 2 x 32 mm Pistons

The rear brake caliper from HEL Performance is equipped with 1 pad retaining pin. To replace the brake pads, simply unscrew this pin briefly and replace the pads. The calipers should be blown out with air before reinstallation to ensure that the inner surfaces are clean. Separate bleed nipples ensure that the bleed point is located at the highest possible point on the brake caliper. Our brake calipers also feature a complete, circumferential fluid path. This means that fluid flows in a complete loop through the brake caliper, making it easier to completely remove air from the system.

Our brake calipers weigh 480 grams (excluding pads and retaining pin) and are equipped with stainless steel pistons. Stainless steel acts as a heat sink, dissipating the heat generated by braking. The brake fluid heats up less. The boiling point of brake fluids varies depending on the specific fluid used. Storing the heat in the pistons instead of heating the fluid improves braking performance over a longer period—perfect for the track.

We manufacture our brake calipers exclusively on state-of-the-art CNC machines from solid 6082-T6 billet aluminum. Many mass-produced brake calipers are forged, but this limits their design possibilities. The forged parts must also be machined for threads and the internal flow path, as the forging process is unable to produce these details. We offer the very highest product quality. The finish is stunning, with every part machined to CNC precision. We maximize weight savings and minimize material consumption. Radial mounting of two-piece brake pads with two pads per caliper.

• 2-stainless-steel-piston (32 mm) caliper design.
• The caliper is made of solid 6082-T6 aluminum.
• High-temperature seals.
• 84 mm axial mounting for many modern motorcycles.
• The kit includes an instruction manual with all the information regarding installation, bleeding, maintenance, and more.

The calipers are designed to accommodate stock brake pads for well-known supersport motorcycles. This gives you a wide selection of brake pads from nearly all manufacturers and suppliers.

We currently offer EBC FA266 brake pads in various compound options as an option.

Package Contents:

• 1 x CNC-machined brake caliper
• 1 x stainless steel hollow screw with copper sealing ring

Compatible accessories (not included): EBC Type FA266 brake pads

For more information, please visit the following link

Note: Brake master cylinders and brake calipers from HEL Performance are not compatible with Castrol’s SRF Racing brake fluid! Using this brake fluid may cause seals to fail under certain conditions.

HEL-Performance® Thumb Brake Pump TB-2 - Short Lever (70 mm)

We’re continuing to move forward with new products from HEL Performance.
Next, we’re introducing the new TB-2 thumb brake pump.

• The TB-2 is the successor to the already successful TB-1.
• With its many adjustment options, it should meet all your personal needs.
• The clamp is mounted directly on the handlebars—not on the fork, as was previously the case. The pump can be positioned as desired.
• The lever spacing can be easily adjusted at any time—just like on a radial brake pump—using the adjustment wheel.

Thumb, what more could you want!! ?? !!

It is available in two versions:
a) 13 mm piston diameter, HARTCOAT BLACK housing
b) 13 mm piston diameter, HARTCOAT GREY housing

The lever itself is always supplied with a black anodized finish.

The clamp for mounting on the handlebar/stem has a 22mm diameter

Both the housing and the lever are milled from solid stock at HEL Performance in Exeter (UK) using brand-new CNC machining centers.

Inexpensive PVC hose for connecting to expansion tanks on brake pumps, etc.

Universally compatible with brake pumps, fittings, and expansion tanks.

Price per centimeter!

Inner diameter: approx. 7 mm
Outer diameter: approx. 10 mm

Material: PVC plastic, brake fluid-resistant*

(*Suitable for DOT 3 & 4, DOT 5, DOT 5.1. Only conditionally suitable for racing brake fluids)

HEL-Performance®stainless steel banjo bolt, 3/8" x 24 UNF/JIC
Incl. copper sealing rings

Scope of delivery: 1 x stainless steel banjo bolt, 2 x copper sealing ring

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance®stainless steel banjo bolt, 1/8 "BSP
Incl. copper sealing rings

Scope of delivery: 1 x stainless steel banjo bolt, 2 x copper sealing ring

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® stainless steel banjo bolt, M6x1.00
Incl. copper sealing rings

Scope of delivery: 1 x stainless steel banjo bolt, 2 x copper sealing ring

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® Stainless Steel Bleed Nipple, M6x1.00

Finally, a stainless steel bleed nipple!
Corrosion-resistant, high strength!


Package contents: 1 x stainless steel bleed nipple

Stahlflex brake lines and kits from HEL Performance:

HEL-Performance® Brake Line Kit, including hollow screws** and accessories**

• No line expansion at high temperatures
• Eliminates the spongy feeling in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or parts certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed—or not yet listed—please contact us directly.

(** is included, if required)

HEL-Performance® stainless steel banjo bolt, M12x1.00x18 (18mm long)
Incl. copper sealing rings

Scope of delivery: 1 x stainless steel banjo bolt, 2 x copper sealing ring

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® Handlebar Brake Pump PB-1 (Pullbrake) 10mm Piston Diameter

We’re continuing to move forward with new products from HEL Performance.
Next, we’re introducing the new handlebar brake pump.
It’s also sometimes called a “scooter brake” or, in English, a “pullbrake.”

• The PB-1 is already all the rage in some circles
• The pump comes with a handlebar clamp that allows you to adjust the pump’s position to suit your personal needs.
• The clamp is attached directly to the handlebar
• The lever spacing can be easily adjusted at any time, just like with a radial brake pump (adjustment wheel)

Wheelie and slide control made easy!! ?? !!

It is currently available with 10 mm, 11 mm, or 13 mm piston diameters
The housing, lever, and clamp are black anodized

HEL-Performance® copper sealing rings for 14mm ring connections/screws

Sold in packs of 10
(order quantity 10 pieces, 20 pieces etc.)

Tighten brake lines, banjo bolts and connections!
Note Tightening torque for:

• Stainless steel fitting and stainless steel banjo bolts Min. 20 Nm - Max. 33 Nm.
• Stainless steel fitting and aluminum banjo bolt Min. 18 Nm - Max. 21 Nm.
• Aluminum fitting and stainless steel banjo bolt Min. 18 Nm - Max. 21 Nm.
• Aluminum fitting and aluminum banjo bolt Min. 18 Nm - Max. 21 Nm.

The vehicle manufacturer's tightening values must not be exceeded!

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

Connection piece for the hose to the expansion tank. Straight, 45° or 90° angled

Suitable for HEL Performance radial brake pump/clutch pump/permanent brake pump. Incl. rubber seal

Material: Plastic / rubber

Scope of delivery: 1 x plastic connection, 1 x seal

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

Stainless steel spacers, cylindrical shape, for M10 screws. Various lengths

Suitable for HEL Performance brake callipers

Material: Stainless steel

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® spacer for ring connection M10 or 3/8"

Cylindrical shape,

Approx. dimensions: inside 10.1mm, outside 14.1mm, height 8.0mm

Scope of delivery: 1 x spacer, 2 copper sealing rings
Material: Stainless steel

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® stainless steel banjo bolt, M8x1.25
Incl. copper sealing rings

Scope of delivery: 1 x stainless steel banjo bolt, 2 x copper sealing ring

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® double nipple with external thread M10x1.00 - M10x1.25 VA

Connecting nipple with sealing cone. M10x1.00 = convex, M10x1.25 = concave.

Scope of delivery: 1 x double nipple
Material: Stainless steel

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance®thumb brake pump TB-1
(Article is discontinued. Successor is the new thumb brake pump MK-II, handlebar mounting)

We are continuing with new products from HEL Performance.
Next up is the new radial thumb brake pump.

• The TB-1 is both tricky and ingenious.
• The many adjustment options should leave nothing to be desired in terms of customization.
• The clamp is aligned in the desired position and attached to the fork.
  (NOTE: The clamp does not have a joint as shown, but is a one-piece clamp.
  The fork or triple clamp must be loosened accordingly for installation).
• The lever distance can be conveniently adjusted at any time as with the radial brake pump (adjustment wheel)
• The lever has a joint that can be used to position the end of the lever higher or lower.
• In addition, the end of the lever is in two parts. This allows you to adjust the length of the lever yourself.

Thumbs, what more could you want !!! ?? !!

It is available in two versions:
a) 13mm piston diameter, nickel-plated housing
b) 13mm piston diameter, black anodized housing

The lever itself is always supplied in black anodized.

The clamp (one-piece, without joint) for attachment to the fork can be selected in the following sizes/diameters,
and at no extra charge when ordering:

40 mm, 41 mm, 42 mm, 43 mm, 44 mm, 45 mm, 46 mm, 47 mm, 48 mm, 49 mm,
50 mm, 51 mm, 52 mm, 53 mm, 53.5 mm, 54 mm, 55 mm, 56 mm, 57 mm, 58 mm

Includes hollow screws and copper gaskets (if needed)
With ABE (if ABS remains active)

We offer you a selection of different configurations here.
To help you choose, we have created a layout diagram that makes it relatively easy and straightforward to select the configuration you want.

Please use this diagram as a guide:
(Clicking the image opens a new window with a larger image)

In the product options, please select which front brake caliper and master cylinder are used, and whether the lines for the variant WITH distributor AND lines 3+4 should run in front of or behind the fork.

Recommended combinations include, for example:

Hose Nos.: 1, 2a, 3, 4, 6, and 7 (6-piece kit with ABS and manifold under the triple clamp)
(If you order lines 5a and 8 as well, you can convert from the ABS version to the non-ABS version with relatively little effort)

Wires No.: 5a, 3, 4, and 8 (4-piece kit without ABS, with distributor under the fork bridge)

Hose No.: 5a, 3b, and 8 (5-piece kit without ABS, with T-fitting and 90° elbow permanently crimped)

Hose No.: 5b, 3a, and 8 (3-piece kit without ABS, without manifold)

Special Line Kit:
We developed this line kit, and depending on the configuration, it fits the original calipers and original master cylinder. Or, for example, if the original brake calipers have been replaced with others, such as Brembo M4 or M50 calipers.

The lines can ONLY be routed in combination with the “manifold AND lines 3+4,” either in front of or behind the fork leg. This manifold is permanently crimped to lines 3+4 and, just like the original, is secured with a screw directly under the triple clamp. From there, two lines run to the right and left, respectively. The manifold block has an internal thread on the back for the line to the ABS control module, or directly to the pump, depending on the selected variant.

You have the option of connecting the brake calipers from the HEL manifold directly to the parking brake pump via the short line (5). This allows you to bypass the ABS control system*. This option is often chosen for use on racetracks. It can also be converted relatively quickly, so that both variants are readily available if needed.

*NOTE: If you wish to deactivate the ABS control system, the rear lines must be replaced with a single line providing a direct connection between the pump and the brake calipers. The ABS control unit is deactivated, the lines are unscrewed from it, and the openings are simply sealed with plugs or screws. Please follow the vehicle manufacturer’s instructions.

If you have any additional special requests, please contact us.
We can make a lot of things happen :-)

Source of kit photos: www.racefoxx.com

(Includes stainless steel hollow screws* (*for banjo fittings), includes copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

	with ABE, parts certification, or technical certification for special modifications
	Sometimes you simply need more than just an ABE or a parts certificate. For special applications and modifications, we also offer a purely technical certificate. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project! Note: No ABE is required for clutch lines!
	Connections can be rotated at any time
	No matter how far or how often!! Even back-and-forth movement is no problem thanks to HEL Performance’s unique design. You can count on it!!!!! #EasyMount
	Precisely fitting hose kits!
	Easy installation, since every brake line kit comes with all the necessary accessories—such as the required hollow screws*, O-rings, and mounts—already attached to the hose! No hidden extra costs #EasyMount #YouGetWhatYouNeed
	Precise brake pedal feel, improved brake modulation
	Thanks to improved modulation and a precise bite point, you’ll gain a whole new level of control over the entire braking process! #RideTheBestYouCan
	All mounting parts are developed and manufactured by HEL in England!
	HEL Performance has an arsenal of machines on which we manufacture all fittings ourselves from the finest stainless steel. This allows us to fully control every process, from the very first step all the way to the finished brake line. You get the best product straight from our factory. #NoCompromise
	Production of the lines in Germany (Made in Germany)
	Every HEL Performance line is assembled in-house using the best stainless steel fittings and then permanently crimped on modern, digitally controlled machinery. Every line undergoes a final inspection before it is shipped. #SafetyFirst
	Motorsport-proven technology
	Our products are used in the highest levels of motorsports—whether it’s MotoGP, Moto2, Moto3, or the EWC (the premier class when it comes to material requirements). You always get the same, top-notch HEL quality! #RideTheBestYouCan #RideHEL #TeamHEL

Stainless steel braided brake lines and kits from HEL Performance optimize your motorcycle’s braking system. With improved modulation and a precise bite point, you’ll gain a whole new level of control over the entire braking process! Whether you ride a MotoGP, Moto2, Moto3, WSBK, IDM, or EWC motorcycle—or even a simple 50cc scooter—every vehicle needs the best possible braking system in every situation. Stainless steel braided brake lines from HEL Performance are the key to achieving this.

The fine line between victory and defeat

Every kilometer of a racetrack highlights just how important a well-balanced braking system is. Perfect control gives you the confidence you need, because the difference between a good rider and an average one is that one has their speed under control, while the other does not. That’s why here at HEL Performance, we manufacture the best lines, giving you the control you need for peak performance.

With us, you’ll find the right brake line kit for your vehicle and get exactly what you expect: high-quality materials, excellent performance, and visually stunning brake lines.

We use only stainless steel components for all parts of our lines—unlike other manufacturers, who use steel fittings that rust over time and pose a safety risk.

Choose your desired color and click “Add to Cart” to order your HEL brake lines.

HEL Performance offers brake line kits with so-called “alternative routing” options—even with ABE certification!

For many models, we offer different routing options:

OEM, like the original (Standard Kit): The brake lines match an original replacement part in length, number, and routing.

Alternatively, Full Length: Two lines routed directly from the brake master cylinder—one to the right and one to the left—to the brake calipers.

Alternatively, Over the Mudguard: One line runs directly from the brake master cylinder to the right brake caliper; the second runs from there over the fender to the left brake caliper.

The ABE is continuously updated. If your vehicle is not listed, or not yet listed, please contact us directly.

Note: The photos shown are examples and do not depict the brake line kit for the specified vehicle! When placing your order, you can specify your preferred hose color. The lines will then be custom-made “fresh” for you according to your preferences and specifications!

Technical Specifications:

You can also find additional information and instructions in the "Questions and Answers"section    
-

HEL-Performance®stainless steel banjo bolt, 7/16" x 20
Incl. copper sealing rings

Scope of delivery: 1 x stainless steel banjo bolt, 2 x copper sealing ring

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

Stainless steel screw with Allen head, conical shape, M10x1.25. Various lengths

Suitable for HEL Performance brake callipers

Material: Stainless steel

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

	Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
	Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!! *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread. #LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL
	with ABE, parts certificate or technical certificate for special conversions
	Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project! Note: No ABE is required for clutch lines! #FitAndRide
	Stainless steel connections, at no extra charge, can be twisted at any time
	No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!! Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car! #EasyMount #NoCompromizes
	PVC coating at no extra charge!
	Already included in the price, PVC coating in up to 14 different colors freely selectable. #BetterOptic
	Precisely fitting cable kits!
	Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are supplied with every brake line kit! No hidden additional costs #EasyMount #YouGetWhatYouNeed
	Precise pressure point, better modulation of the brake system
	Better modulation and a precise pressure point give you completely new control over the entire braking process! #RideTheBestYouCan
	Development and production of all connecting parts at HEL in England!
	HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake hose. You get the best product from our company. #NoCompromize
	Production of the lines in Germany (Made in Germany)
	Every HEL Performance line is combined in-house with the best stainless steel fittings according to your configuration regarding line colors and connections, whether stealth or not, and then permanently pressed on modern, digitally controlled systems. Every cable undergoes a final inspection before it is delivered. #SafetyFirst
	Motorsport proven technology
	Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality! #RideTheBestYouCan #RideHEL #TeamHEL

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Stainless steel brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good driver and an average driver is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and not steel connections like other manufacturers, which rust over the course of their service life and pose a safety risk again.

Choose your desired color and click on Add to cart to order your HEL brake lines.

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative, Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

Further information and instructions can also be found in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

HEL-Performance® Stainless Steel Hollow Screw, RACE-BOLT, M10x1.25
Includes copper sealing rings

Specially designed hollow screw with a perforated head for use with locking wire. For racing—or simply because it looks great!

Package contents: 1 x stainless steel Race-Bolt hollow screw, 2 x copper sealing rings

Stahlflex brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including hollow bolts** and accessories**

• No expansion of the lines at high temperatures
• Eliminates the spongy feeling in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed, or is not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® stainless steel air vent double banjo bolt, M10x1.00
Incl. copper sealing rings and dust cap

Very practical banjo bolt with integrated bleeder nipple.
This allows lines to be vented directly at the banjo bolt.
A very practical tool!

Scope of delivery: 1 x stainless steel bleeder banjo bolt, 3 x copper sealing ring, 1 x dust cap

Steel flex brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)