S1000

Includes hollow screws and copper gaskets (if needed)
With ABE (if ABS remains active)

We offer you a selection of different configurations here.
To help you choose, we have created a layout diagram that makes it relatively easy and straightforward to select the configuration you want.

Please use this diagram as a guide:
(Clicking the image opens a new window with a larger image)

In the product options, please select which front brake caliper and master cylinder are used, and whether the lines for the variant WITH distributor AND lines 3+4 should run in front of or behind the fork.

Recommended combinations include, for example:

Hose Nos.: 1, 2a, 3, 4, 6, and 7 (6-piece kit with ABS and manifold under the triple clamp)
(If you order lines 5a and 8 as well, you can convert from the ABS version to the non-ABS version with relatively little effort)

Wires No.: 5a, 3, 4, and 8 (4-piece kit without ABS, with distributor under the fork bridge)

Hose No.: 5a, 3b, and 8 (5-piece kit without ABS, with T-fitting and 90° elbow permanently crimped)

Hose No.: 5b, 3a, and 8 (3-piece kit without ABS, without manifold)

Special Line Kit:
We developed this line kit, and depending on the configuration, it fits the original calipers and original master cylinder. Or, for example, if the original brake calipers have been replaced with others, such as Brembo M4 or M50 calipers.

The lines can ONLY be routed in combination with the “manifold AND lines 3+4,” either in front of or behind the fork leg. This manifold is permanently crimped to lines 3+4 and, just like the original, is secured with a screw directly under the triple clamp. From there, two lines run to the right and left, respectively. The manifold block has an internal thread on the back for the line to the ABS control module, or directly to the pump, depending on the selected variant.

You have the option of connecting the brake calipers from the HEL manifold directly to the parking brake pump via the short line (5). This allows you to bypass the ABS control system*. This option is often chosen for use on racetracks. It can also be converted relatively quickly, so that both variants are readily available if needed.

*NOTE: If you wish to deactivate the ABS control system, the rear lines must be replaced with a single line providing a direct connection between the pump and the brake calipers. The ABS control unit is deactivated, the lines are unscrewed from it, and the openings are simply sealed with plugs or screws. Please follow the vehicle manufacturer’s instructions.

If you have any additional special requests, please contact us.
We can make a lot of things happen :-)

Source of kit photos: www.racefoxx.com

(Includes stainless steel hollow screws* (*for banjo fittings), includes copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

	with ABE, parts certification, or technical certification for special modifications
	Sometimes you simply need more than just an ABE or a parts certificate. For special applications and modifications, we also offer a purely technical certificate. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project! Note: No ABE is required for clutch lines!
	Connections can be rotated at any time
	No matter how far or how often!! Even back-and-forth movement is no problem thanks to HEL Performance’s unique design. You can count on it!!!!! #EasyMount
	Precisely fitting hose kits!
	Easy installation, since every brake line kit comes with all the necessary accessories—such as the required hollow screws*, O-rings, and mounts—already attached to the hose! No hidden extra costs #EasyMount #YouGetWhatYouNeed
	Precise brake pedal feel, improved brake modulation
	Thanks to improved modulation and a precise bite point, you’ll gain a whole new level of control over the entire braking process! #RideTheBestYouCan
	All mounting parts are developed and manufactured by HEL in England!
	HEL Performance has an arsenal of machines on which we manufacture all fittings ourselves from the finest stainless steel. This allows us to fully control every process, from the very first step all the way to the finished brake line. You get the best product straight from our factory. #NoCompromise
	Production of the lines in Germany (Made in Germany)
	Every HEL Performance line is assembled in-house using the best stainless steel fittings and then permanently crimped on modern, digitally controlled machinery. Every line undergoes a final inspection before it is shipped. #SafetyFirst
	Motorsport-proven technology
	Our products are used in the highest levels of motorsports—whether it’s MotoGP, Moto2, Moto3, or the EWC (the premier class when it comes to material requirements). You always get the same, top-notch HEL quality! #RideTheBestYouCan #RideHEL #TeamHEL

Stainless steel braided brake lines and kits from HEL Performance optimize your motorcycle’s braking system. With improved modulation and a precise bite point, you’ll gain a whole new level of control over the entire braking process! Whether you ride a MotoGP, Moto2, Moto3, WSBK, IDM, or EWC motorcycle—or even a simple 50cc scooter—every vehicle needs the best possible braking system in every situation. Stainless steel braided brake lines from HEL Performance are the key to achieving this.

The fine line between victory and defeat

Every kilometer of a racetrack highlights just how important a well-balanced braking system is. Perfect control gives you the confidence you need, because the difference between a good rider and an average one is that one has their speed under control, while the other does not. That’s why here at HEL Performance, we manufacture the best lines, giving you the control you need for peak performance.

With us, you’ll find the right brake line kit for your vehicle and get exactly what you expect: high-quality materials, excellent performance, and visually stunning brake lines.

We use only stainless steel components for all parts of our lines—unlike other manufacturers, who use steel fittings that rust over time and pose a safety risk.

Choose your desired color and click “Add to Cart” to order your HEL brake lines.

HEL Performance offers brake line kits with so-called “alternative routing” options—even with ABE certification!

For many models, we offer different routing options:

OEM, like the original (Standard Kit): The brake lines match an original replacement part in length, number, and routing.

Alternatively, Full Length: Two lines routed directly from the brake master cylinder—one to the right and one to the left—to the brake calipers.

Alternatively, Over the Mudguard: One line runs directly from the brake master cylinder to the right brake caliper; the second runs from there over the fender to the left brake caliper.

The ABE is continuously updated. If your vehicle is not listed, or not yet listed, please contact us directly.

Note: The photos shown are examples and do not depict the brake line kit for the specified vehicle! When placing your order, you can specify your preferred hose color. The lines will then be custom-made “fresh” for you according to your preferences and specifications!

Technical Specifications:

You can also find additional information and instructions in the "Questions and Answers"section    
-

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

	Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
	Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!! *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread. #LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL
	with ABE, parts certificate or technical certificate for special conversions
	Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project! Note: No ABE is required for clutch lines! #FitAndRide
	Stainless steel connections, at no extra charge, can be twisted at any time
	No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!! Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car! #EasyMount #NoCompromizes
	PVC coating at no extra charge!
	Already included in the price, PVC coating in up to 14 different colors freely selectable. #BetterOptic
	Custom-fit cable kits !
	Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs #EasyMount #YouGetWhatYouNeed
	Precise pressure point, better modulation of the brake system
	Better modulation and a precise pressure point give you completely new control over the entire braking process! #RideTheBestYouCan
	Development and production of all connecting parts at HEL in England!
	HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company. #NoCompromize
	Production of the lines in Germany (Made in Germany)
	Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered. #SafetyFirst
	Motorsport proven technology
	Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality! #RideTheBestYouCan #RideHEL #TeamHEL

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

	Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
	Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!! *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread. #LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL
	with ABE, parts certificate or technical certificate for special conversions
	Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project! Note: No ABE is required for clutch lines! #FitAndRide
	Stainless steel connections, at no extra charge, can be twisted at any time
	No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!! Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car! #EasyMount #NoCompromizes
	PVC coating at no extra charge!
	Already included in the price, PVC coating in up to 14 different colors freely selectable. #BetterOptic
	Custom-fit cable kits !
	Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs #EasyMount #YouGetWhatYouNeed
	Precise pressure point, better modulation of the brake system
	Better modulation and a precise pressure point give you completely new control over the entire braking process! #RideTheBestYouCan
	Development and production of all connecting parts at HEL in England!
	HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company. #NoCompromize
	Production of the lines in Germany (Made in Germany)
	Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered. #SafetyFirst
	Motorsport proven technology
	Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality! #RideTheBestYouCan #RideHEL #TeamHEL

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

	Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
	Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!! *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread. #LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL
	with ABE, parts certificate or technical certificate for special conversions
	Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project! Note: No ABE is required for clutch lines! #FitAndRide
	Stainless steel connections, at no extra charge, can be twisted at any time
	No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!! Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car! #EasyMount #NoCompromizes
	PVC coating at no extra charge!
	Already included in the price, PVC coating in up to 14 different colors freely selectable. #BetterOptic
	Custom-fit cable kits !
	Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs #EasyMount #YouGetWhatYouNeed
	Precise pressure point, better modulation of the brake system
	Better modulation and a precise pressure point give you completely new control over the entire braking process! #RideTheBestYouCan
	Development and production of all connecting parts at HEL in England!
	HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company. #NoCompromize
	Production of the lines in Germany (Made in Germany)
	Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered. #SafetyFirst
	Motorsport proven technology
	Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality! #RideTheBestYouCan #RideHEL #TeamHEL

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

	Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
	Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!! *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread. #LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL
	with ABE, parts certificate or technical certificate for special conversions
	Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project! Note: No ABE is required for clutch lines! #FitAndRide
	Stainless steel connections, at no extra charge, can be twisted at any time
	No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!! Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car! #EasyMount #NoCompromizes
	PVC coating at no extra charge!
	Already included in the price, PVC coating in up to 14 different colors freely selectable. #BetterOptic
	Custom-fit cable kits !
	Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs #EasyMount #YouGetWhatYouNeed
	Precise pressure point, better modulation of the brake system
	Better modulation and a precise pressure point give you completely new control over the entire braking process! #RideTheBestYouCan
	Development and production of all connecting parts at HEL in England!
	HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company. #NoCompromize
	Production of the lines in Germany (Made in Germany)
	Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered. #SafetyFirst
	Motorsport proven technology
	Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality! #RideTheBestYouCan #RideHEL #TeamHEL

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

	Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
	Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!! *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread. #LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL
	with ABE, parts certificate or technical certificate for special conversions
	Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project! Note: No ABE is required for clutch lines! #FitAndRide
	Stainless steel connections, at no extra charge, can be twisted at any time
	No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!! Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car! #EasyMount #NoCompromizes
	PVC coating at no extra charge!
	Already included in the price, PVC coating in up to 14 different colors freely selectable. #BetterOptic
	Custom-fit cable kits !
	Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs #EasyMount #YouGetWhatYouNeed
	Precise pressure point, better modulation of the brake system
	Better modulation and a precise pressure point give you completely new control over the entire braking process! #RideTheBestYouCan
	Development and production of all connecting parts at HEL in England!
	HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company. #NoCompromize
	Production of the lines in Germany (Made in Germany)
	Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered. #SafetyFirst
	Motorsport proven technology
	Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality! #RideTheBestYouCan #RideHEL #TeamHEL

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

	Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
	Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!! *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread. #LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL
	with ABE, parts certificate or technical certificate for special conversions
	Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project! Note: No ABE is required for clutch lines! #FitAndRide
	Stainless steel connections, at no extra charge, can be twisted at any time
	No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!! Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car! #EasyMount #NoCompromizes
	PVC coating at no extra charge!
	Already included in the price, PVC coating in up to 14 different colors freely selectable. #BetterOptic
	Custom-fit cable kits !
	Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs #EasyMount #YouGetWhatYouNeed
	Precise pressure point, better modulation of the brake system
	Better modulation and a precise pressure point give you completely new control over the entire braking process! #RideTheBestYouCan
	Development and production of all connecting parts at HEL in England!
	HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company. #NoCompromize
	Production of the lines in Germany (Made in Germany)
	Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered. #SafetyFirst
	Motorsport proven technology
	Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality! #RideTheBestYouCan #RideHEL #TeamHEL

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

	Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
	Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!! *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread. #LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL
	with ABE, parts certificate or technical certificate for special conversions
	Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project! Note: No ABE is required for clutch lines! #FitAndRide
	Stainless steel connections, at no extra charge, can be twisted at any time
	No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!! Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car! #EasyMount #NoCompromizes
	PVC coating at no extra charge!
	Already included in the price, PVC coating in up to 14 different colors freely selectable. #BetterOptic
	Custom-fit cable kits !
	Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs #EasyMount #YouGetWhatYouNeed
	Precise pressure point, better modulation of the brake system
	Better modulation and a precise pressure point give you completely new control over the entire braking process! #RideTheBestYouCan
	Development and production of all connecting parts at HEL in England!
	HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company. #NoCompromize
	Production of the lines in Germany (Made in Germany)
	Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered. #SafetyFirst
	Motorsport proven technology
	Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality! #RideTheBestYouCan #RideHEL #TeamHEL

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

	Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
	Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!! *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread. #LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL
	with ABE, parts certificate or technical certificate for special conversions
	Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project! Note: No ABE is required for clutch lines! #FitAndRide
	Stainless steel connections, at no extra charge, can be twisted at any time
	No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!! Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car! #EasyMount #NoCompromizes
	PVC coating at no extra charge!
	Already included in the price, PVC coating in up to 14 different colors freely selectable. #BetterOptic
	Custom-fit cable kits !
	Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs #EasyMount #YouGetWhatYouNeed
	Precise pressure point, better modulation of the brake system
	Better modulation and a precise pressure point give you completely new control over the entire braking process! #RideTheBestYouCan
	Development and production of all connecting parts at HEL in England!
	HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company. #NoCompromize
	Production of the lines in Germany (Made in Germany)
	Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered. #SafetyFirst
	Motorsport proven technology
	Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality! #RideTheBestYouCan #RideHEL #TeamHEL

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

	Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
	Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!! *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread. #LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL
	with ABE, parts certificate or technical certificate for special conversions
	Sometimes it just has to be more than an ABE or a parts certificate. For special applications and conversions, we also offer a purely technical certificate. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project! Note: No ABE is required for clutch lines! #FitAndRide
	Stainless steel connections, at no extra charge, can be twisted at any time
	No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!! Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car! #EasyMount #NoCompromizes
	PVC coating at no extra charge!
	Already included in the price, PVC coating in up to 14 different colors freely selectable. #BetterOptic
	Precisely fitting cable kits!
	Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are supplied with every brake line kit! No hidden additional costs #EasyMount #YouGetWhatYouNeed
	Precise pressure point, better modulation of the brake system
	Better modulation and a precise pressure point give you completely new control over the entire braking process! #RideTheBestYouCan
	Development and production of all connecting parts at HEL in England!
	HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company. #NoCompromize
	Production of the lines in Germany (Made in Germany)
	Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered. #SafetyFirst
	Motorsport-proven technology
	Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality! #RideTheBestYouCan #RideHEL #TeamHEL

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good driver and an average driver is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and not steel connections like other manufacturers, which rust over the course of their service life and pose a safety risk again.

Choose your desired color and click on Add to cart to order your HEL brake lines.

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative, Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

Further information and instructions can also be found in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-