HEL BRAKE PUMPS

HEL-Performance® Radial Hand Brake Master Cylinder, 19 or 16 mm Piston Diameter! HMC-MK-I

!!! 2025 Price Reduction: Now Only €289.00 MSRP !!!

The HEL Performance radial brake master cylinder has now become a staple of the racing scene.
Machined from solid material (housing and lever) and a real steal for less than 300 euros!

It is available in two versions:
a) 19 mm piston diameter ( 19 x 18, 19 x 19, 19 x 20 mm)
b) 16 mm piston diameter ( 16 x 18, 16 x 19, 16 x 20mm)

Both the housing and the lever are milled from solid material at HEL Performance in Exeter (UK) using brand-new CNC machining centers. The housing is nickel-plated, and the lever is black anodized.

The newly developed brake levers come with two inserts that allow the pump’s gear ratio to be adjusted as needed.

Insert 1) has a center hole, while Insert 2) has an off-center hole.

Simply swap or rotate the insert to set the desired gear ratio for optimal control and brake feel.

The pumps are designed for use onboth the right and left sides of the handlebars !!! The bleed nipples and the brake line connection have the same thread (M10x1.00). This allows either the brake line or, optionally, the bleed nipple to be used at both holes.

Weight: Approx. 285 grams
Material : Housing / Lever = 6082-T6 aluminum, machined from solid
                            Pistons and screws = stainless steel
Housing: hard-coated or anodized
Lever: Anodized

Package Contents:
1 x radial brake cylinder with brake lever
2 x inserts for adjusting the lever ratio
1 x M10x1.00 stainless steel hollow screw with copper O-rings
Installation/Maintenance Instructions

An ABE is in the works!!

#WhatsStoppingYou

Note: HEL Performance brake master cylinders and calipers are not compatible with Castrol’s SRF Racing brake fluid! Using this brake fluid may cause seal failure under certain conditions.

HEL-Performance® Radial Hand Brake Master Cylinder V2 / "3-Seal Technology" NEW PRODUCT 2025
Available with a 19mm or 16mm piston diameter!

2nd generation of the popular radial brake master cylinder from HEL Performance.
Machined from solid metal (housing and lever)—and for less than 400 euros, it’s a real steal in this price range!
The brake master cylinder was redesigned with great care and expertise.

• 2 piston diameters: 16 and 19 mm
• Lever swap can be done in just a few seconds with a single screw
• 3 lever lengths: S2, M3, L4 (the M3 version is installed as standard; S2 and L4 are available as accessories)
• Sealed bleed nipples
• Brake pump with“3-Seal Technology”
• CNC-machined housing and lever
• CNC-milled folding lever as standard
• CNC-machined brake fluid reservoir available as an accessory
• Mechanical lever ratio easily adjustable.
  a) 19 mm piston diameter ( 19 x 18, 19 x 19, 19 x 20 mm)
  b) 16 mm piston diameter ( 16 x 18, 16 x 19, 16 x 20mm)
• Integrated micro brake light switch
• Remote adjuster available as an accessory

Both the housing and the lever are milled from solid material at HEL Performance in Exeter (UK) using state-of-the-art CNC machining centers. The housing features a high-quality, modern CERACOTE coating, and the lever is anodized. (CERACOTE coating is also available in many colors as a special order)

The mechanical lever ratio can be easily adjusted to your personal preference using an integrated component. Super fast and convenient.
The newly developed brake lever is mounted to the housing with just a single screw. This makes it very easy and quick to replace the entire unit.

Weight: Approx. 300 grams
Material: Housing / Lever = 6082-T6 aluminum, machined from solid
                            Pistons and screws = stainless steel
Housing: CEARCOTE coating
Lever: Anodized

Package Contents:
1 x radial brake cylinder with brake lever and MICRO brake light switch
1 x M10x1.00 stainless steel hollow screw with copper sealing rings
Installation/Maintenance Instructions

An ABE is in the works!!

#WhatsStoppingYou

Note: Brake master cylinders and calipers from HEL Performance are not compatible with Castrol’s SRF Racing brake fluid! Using this brake fluid may, under certain circumstances, cause seal failure.

HEL-Performance® Radial Hand Brake Master Cylinder V2 / "3-Seal Technology" Race Edition (not for road use)
Available with a 19mm or 16mm piston diameter!

2nd generation of the popular radial brake master cylinder from HEL Performance. But in the Race Edition.
Machined from solid (housing and lever) 

• Piston diameters: 17.5 and 19 mm
• Lever can be swapped in just a few seconds with a single screw
• 3 lever lengths: S2, M3, L4 (M3 is standard; S2 and L4 are available as accessories)
• Bleed nipples sealed
• Brake master cylinder with "3-Seal Technology"
• CNC-machined housing and lever
• CNC-milled folding lever as standard
• CNC-machined brake fluid reservoir available as an accessory
• Mechanical lever ratio easily adjustable.
  a) 19 mm piston diameter ( 19 x 18, 19 x 20 mm)
  b) 16 mm piston diameter ( 16 x 18, 16 x 20mm)
• WITHOUT micro-stop light switch
• Remote adjuster available as an accessory

Both the housing and the lever are milled from solid stock at HEL Performance in Exeter (UK) using state-of-the-art CNC machining centers. The housing features a high-quality, modern CERACOTE coating; the lever is anodized. (CERACOTE coating is also available in many colors as a special order)

The mechanical lever ratio can be easily adjusted to your personal preference using an integrated component. Super fast and convenient.
The newly developed brake lever is mounted to the housing with just a single screw. This makes it very easy and quick to replace the entire unit.

Weight: Approx. 300 grams
Material: Housing / Lever = 6082-T6 aluminum, machined from solid
                            Pistons and screws = stainless steel
Housing: CEARCOTE coating
Lever: Anodized

Package Contents:
1 x radial brake cylinder with brake lever and MICRO brake light switch
1 x M10x1.00 stainless steel hollow screw with copper sealing rings
Installation/Maintenance Instructions

An ABE is in the works!!

#WhatsStoppingYou

Note: Brake master cylinders and calipers from HEL Performance are not compatible with Castrol’s SRF Racing brake fluid! Using this brake fluid may cause seals to fail under certain conditions.

HEL-Performance®CNC reservoir for radial hand brake pump V2 NEW PRODUCT 2025

Milled from the solid.

• CNC milled reservoir for brake fluid
• Inspection glass for fill level
• Can be used on the right and left of the handlebars (brake/clutch)

The reservoir is screwed onto the connection to the reservoir of the new MK-2 radial brake pump using an M12 screw. Can be easily adjusted to the optimum position by twisting. Housing milled from solid material on modern CNC machining centers at HEL Performance in Exeter (UK). Housing with high-quality and modern CERACOTE coating. (CERACOTE coating is also available in many colors as a special order)

Weight : Approx. 300 grams
Material : Housing / cover = 6082-T6 aluminum, milled from the solid
Housing : CEARCOTE coating

Scope of delivery:
1 x expansion tank for radial brake cylinders
1 x stainless steel banjo bolt M12x1.00 with copper sealing rings
Assembly instructions

#WhatsStoppingYou

Note: Brake pumps and brake calipers from HEL Performance are not suitable for use with SRF Racing brake fluid from Castrol! The use of this brake fluid may lead to defective seals.

HEL-Performance® Rear Brake Master Cylinder, 13mm Piston Diameter!

We’re continuing to move forward with new products from HEL Performance.
Next, we’re introducing the new brake master cylinder for the rear wheel.

It is available in two variants and versions:
a) 13mm piston diameter, black anodized housing
b) 13mm piston diameter, nickel-plated housing

c) 13mm piston diameter, black anodized housing, 2 x M10x1.00 connections for use with, e.g., a thumb brake
d) 13 mm piston diameter, nickel-plated housing, 2 x M10x1.00 connections for use with, for example, a thumb brake

HEL-Performance® Combined Rear Brake Pump, 13mm Piston Diameter!

The combination brake pump for the rear wheel was developed so that a pump on the handlebars (whether thumb brake or pull brake) can be used in conjunction with the foot brake for the rear wheel. This is often required by the rules. In such cases, the foot brake must remain in place. However, an additional hand-operated brake pump is permitted.

The new combination brake pump has two connections:
            A) M12x1.00 thread for the handlebar-mounted pump (e.g., thumb brake pump)
            B) M10x1.00 thread for the line leading to the rear brake caliper

So how does it work?
Quite simply, the pump on the handlebars can be operated as long as the combined brake pump is not pressed.
The pressure is routed directly through the combination brake pump to the rear brake caliper.

However, when the handlebar pump is pressed, the combined brake pump can also be actuated.
In principle, the two pumps are arranged in series.

If the combined brake pump is pressed, you can press the handlebar pump as much as you want. Nothing happens because the inlet (M12x1.00) is “sealed off” by the piston in the combined brake pump.

HEL-Performance®thumb brake pump TB-1
(Article is discontinued. Successor is the new thumb brake pump MK-II, handlebar mounting)

We are continuing with new products from HEL Performance.
Next up is the new radial thumb brake pump.

• The TB-1 is both tricky and ingenious.
• The many adjustment options should leave nothing to be desired in terms of customization.
• The clamp is aligned in the desired position and attached to the fork.
  (NOTE: The clamp does not have a joint as shown, but is a one-piece clamp.
  The fork or triple clamp must be loosened accordingly for installation).
• The lever distance can be conveniently adjusted at any time as with the radial brake pump (adjustment wheel)
• The lever has a joint that can be used to position the end of the lever higher or lower.
• In addition, the end of the lever is in two parts. This allows you to adjust the length of the lever yourself.

Thumbs, what more could you want !!! ?? !!

It is available in two versions:
a) 13mm piston diameter, nickel-plated housing
b) 13mm piston diameter, black anodized housing

The lever itself is always supplied in black anodized.

The clamp (one-piece, without joint) for attachment to the fork can be selected in the following sizes/diameters,
and at no extra charge when ordering:

40 mm, 41 mm, 42 mm, 43 mm, 44 mm, 45 mm, 46 mm, 47 mm, 48 mm, 49 mm,
50 mm, 51 mm, 52 mm, 53 mm, 53.5 mm, 54 mm, 55 mm, 56 mm, 57 mm, 58 mm

HEL-Performance® Thumb Brake Pump TB-2 - Short Lever (70 mm)

We’re continuing to move forward with new products from HEL Performance.
Next, we’re introducing the new TB-2 thumb brake pump.

• The TB-2 is the successor to the already successful TB-1.
• With its many adjustment options, it should meet all your personal needs.
• The clamp is mounted directly on the handlebars—not on the fork, as was previously the case. The pump can be positioned as desired.
• The lever spacing can be easily adjusted at any time—just like on a radial brake pump—using the adjustment wheel.

Thumb, what more could you want!! ?? !!

It is available in two versions:
a) 13 mm piston diameter, HARTCOAT BLACK housing
b) 13 mm piston diameter, HARTCOAT GREY housing

The lever itself is always supplied with a black anodized finish.

The clamp for mounting on the handlebar/stem has a 22mm diameter

Both the housing and the lever are milled from solid stock at HEL Performance in Exeter (UK) using brand-new CNC machining centers.

HEL-Performance® Thumb Brake Pump TB-2 - Long Lever (100 mm)

We’re continuing to move forward with new products from HEL Performance.
Next, we’re introducing the new TB-2 thumb brake pump.

• The TB-2 is the successor to the already successful TB-1.
• With its many adjustment options, it should meet all your personal needs.
• The clamp is mounted directly on the handlebars—not on the fork, as was previously the case. The pump can be positioned as desired.
• The lever spacing can be conveniently adjusted at any time—just like on the radial brake pump—using the adjustment wheel.

Thumb, what more could you want!!??!!

It is available in two versions:
a) 13 mm piston diameter, HARTCOAT BLACK housing
b) 13 mm piston diameter, HARTCOAT GREY housing

The lever itself is always supplied with a black anodized finish.

The clamp for mounting on the handlebar/stem has a 22mm diameter

Both the housing and the lever are milled from solid material at HEL Performance in Exeter (UK) using brand-new CNC machining centers.

HEL-Performance® Handlebar Brake Pump PB-1 (Pullbrake) 10mm Piston Diameter

We’re continuing to move forward with new products from HEL Performance.
Next, we’re introducing the new handlebar brake pump.
It’s also sometimes called a “scooter brake” or, in English, a “pullbrake.”

• The PB-1 is already all the rage in some circles
• The pump comes with a handlebar clamp that allows you to adjust the pump’s position to suit your personal needs.
• The clamp is attached directly to the handlebar
• The lever spacing can be easily adjusted at any time, just like with a radial brake pump (adjustment wheel)

Wheelie and slide control made easy!! ?? !!

It is currently available with 10 mm, 11 mm, or 13 mm piston diameters
The housing, lever, and clamp are black anodized

HEL-Performance® Handlebar Brake Pump PB-1 (Pullbrake) 11mm Piston Diameter

We’re continuing to move forward with new products from HEL Performance.
Next, we’re introducing the new handlebar brake pump.
It’s also sometimes called a “scooter brake” or, in English, a “pullbrake.”

• The PB-1 is already all the rage in some circles
• The pump comes with a handlebar clamp that allows you to adjust the pump’s position to suit your personal needs.
• The clamp is attached directly to the handlebar
• The lever spacing can be easily adjusted at any time, just like with a radial brake pump (adjustment wheel)

Wheelie and slide control made easy!! ?? !!

It is currently available with 10 mm, 11 mm, or 13 mm piston diameters
The housing, lever, and clamp are black anodized

HEL-Performance® Handlebar Brake Pump PB-1 (Pullbrake) 13mm Piston Diameter

We’re continuing to move forward with new products from HEL Performance.
Next, we’re introducing the new handlebar brake pump.
It’s also sometimes called a “scooter brake” or, in English, a “pullbrake.”

• The PB-1 is already all the rage in some circles
• The pump comes with a handlebar clamp that allows you to adjust the pump’s position to suit your personal needs.
• The clamp is attached directly to the handlebar
• The lever spacing can be easily adjusted at any time, just like with a radial brake pump (adjustment wheel)

Wheelie and slide control made easy!! ?? !!

It is currently available with 10 mm, 11 mm, or 13 mm piston diameters
The housing, lever, and clamp are black anodized