HEL Performance Germany

HEL Performance Germany

Contact information according to Art. 19 EU GPSR

Postal address

GMS Motorsport GmbH

Burgstr. 4a
79189 Bad Krozingen
Germany

Electronic address

E-Mail: info@gms-motorsport.de
Website: www.gms-moto.eu
Braided steel brake line HEL - Suzuki GS850 GX - GG (GS72A) (1981-1988) - front wheel - 3-piece, (S) as original (w. ABE)
Braided steel brake line HEL - Suzuki GS850 GX - GG (GS72A) (1981-1988) - front wheel - 3-piece, (S) as original (w. ABE)
article nr.HBF7132

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

 

Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
  Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!!
 *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread.
#LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL

with ABE, parts certificate or technical certificate for special conversions
 

Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project!
Note: No ABE is required for clutch lines!
#FitAndRide

Stainless steel connections, at no extra charge, can be twisted at any time
 

No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!!
Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car!
#EasyMount #NoCompromizes

PVC coating at no extra charge!

  Already included in the price, PVC coating in up to 14 different colors freely selectable.
#BetterOptic

Custom-fit cable kits !
 

Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs
#EasyMount #YouGetWhatYouNeed

Precise pressure point, better modulation of the brake system
 

Better modulation and a precise pressure point give you completely new control over the entire braking process!
#RideTheBestYouCan

Development and production of all connecting parts at HEL in England!
 

HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company.
#NoCompromize

Production of the lines in Germany (Made in Germany)
 

Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered.
#SafetyFirst

Motorsport proven technology
 

Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality!
#RideTheBestYouCan #RideHEL #TeamHEL

 

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

 

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

HEL Performance - Always No.1 - What's Stopping You?

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

 

from 165,00CHF / Set
incl. 8,1% VAT plus 12,00CHF DHL-Shipping
Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days!Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days! **
24 months statutory warranty
product details
Braided steel brake line HEL - Suzuki GS850 GX - GG (GS72A) (1981-1988) - rear wheel - 1-piece, (HR) as original (w. ABE)
Braided steel brake line HEL - Suzuki GS850 GX - GG (GS72A) (1981-1988) - rear wheel - 1-piece, (HR) as original (w. ABE)
article nr.HBR7132

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

 

Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
  Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!!
 *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread.
#LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL

with ABE, parts certificate or technical certificate for special conversions
 

Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project!
Note: No ABE is required for clutch lines!
#FitAndRide

Stainless steel connections, at no extra charge, can be twisted at any time
 

No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!!
Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car!
#EasyMount #NoCompromizes

PVC coating at no extra charge!

  Already included in the price, PVC coating in up to 14 different colors freely selectable.
#BetterOptic

Custom-fit cable kits !
 

Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs
#EasyMount #YouGetWhatYouNeed

Precise pressure point, better modulation of the brake system
 

Better modulation and a precise pressure point give you completely new control over the entire braking process!
#RideTheBestYouCan

Development and production of all connecting parts at HEL in England!
 

HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company.
#NoCompromize

Production of the lines in Germany (Made in Germany)
 

Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered.
#SafetyFirst

Motorsport proven technology
 

Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality!
#RideTheBestYouCan #RideHEL #TeamHEL

 

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

 

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

HEL Performance - Always No.1 - What's Stopping You?

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

 

from 57,00CHF / Set
incl. 8,1% VAT plus 12,00CHF DHL-Shipping
Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days!Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days! **
24 months statutory warranty
product details
HEL Steel-Braided Oil Line ZyKo - Suzuki GSF600 / GSF1200 Bandit - 4-Line Cam Kit (-) (1996-2005) - 4
HEL Steel-Braided Oil Line ZyKo - Suzuki GSF600 / GSF1200 Bandit - 4-Line Cam Kit (-) (1996-2005) - 4
article nr.HBF7142

(Includes stainless steel hollow screws* (*for fittings with ring connections/banjo fittings), includes copper O-rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

 

Hollow screws*, sealing rings, brackets, guides, or manifolds are already included in the kit!!
  Compare prices! Ready-to-install brake line kits for your vehicle are always supplied by HEL Performance with the necessary fittings and hollow screws made of the finest stainless steel, copper sealing rings, rubber guides (e.g., grommets), or brackets. Splitter blocks or connection blocks—for example, for connecting to the metal ABS lines—are also included and have already been crimped securely to the hose during production. Lens-shaped seals, as used by many other suppliers, are completely eliminated, since the blocks themselves feature the appropriate sealing cone. At HEL Performance, you pay no extra charge for any of this!!!!
*Some lines do not require a hollow screw, as they already have a connection with internal or external threads.
#LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL

with ABE, parts certification, or technical certification for special modifications
 

Sometimes you simply need more than just an ABE or a parts certificate. For special applications and modifications, we also offer a purely technical certificate. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project!
Note: No ABE is required for clutch lines!
#FitAndRide

Stainless steel fittings, at no extra charge, can be rotated at any time
 

No matter how far or how often!! Even back-and-forth movement is no problem thanks to HEL Performance’s unique design. You’ve got our word on it!!!!!
Stainless steel fittings are our standard, at no extra charge! We won’t settle for anything less on your bike or car!
#EasyMount #NoCompromises

PVC sheathing at no extra charge!

  Already included in the price: PVC sheathing available in up to 14 different colors of your choice.
#BetterOptic

Custom-fit cable kits!
 

Easy installation, since every brake line kit comes with all the necessary accessories—such as the required hollow screws*, O-rings, and mounts—already attached to the hose! No hidden extra costs
#EasyMount #YouGetWhatYouNeed

Precise brake pedal feel, improved brake modulation
 

Thanks to improved modulation and a precise bite point, you’ll gain a whole new level of control over the entire braking process!
#RideTheBestYouCan

All mounting parts are developed and manufactured by HEL in England!
 

HEL Performance has an arsenal of machines on which we manufacture all fittings ourselves from the finest stainless steel. This allows us to fully control every process, from the very first step all the way to the finished brake line. You get the very best product from our company.
#NoCompromise

Brake lines manufactured in Germany (Made in Germany)
 

Every HEL Performance line is assembled in-house using the best stainless steel fittings and then permanently crimped on modern, digitally controlled machinery. Every line undergoes a final inspection before it is shipped.
#SafetyFirst

Motorsport-proven technology
 

Our products are used in the highest classes of motorsport—whether it’s MotoGP, Moto2, Moto3, or EWC (the premier class in terms of material requirements). You always get the same, top-notch HEL quality!
#RideTheBestYouCan #RideHEL #TeamHEL

 

Stainless steel braided brake lines and kits from HEL Performance optimize your motorcycle’s braking system. With improved modulation and a precise bite point, you’ll gain a whole new level of control over the entire braking process! Whether you ride a MotoGP, Moto2, Moto3, WSBK, IDM, or EWC motorcycle—or even a simple 50cc scooter—every vehicle needs the best possible braking system in every situation. Stainless steel braided brake lines from HEL Performance are the key to achieving this.

The fine line between victory and defeat

Every kilometer of a racetrack highlights just how important a well-balanced braking system is. Perfect control gives you the confidence you need, because the difference between a good rider and an average one is that one has their speed under control, while the other does not. That’s why we at HEL Performance manufacture the best lines, giving you the control you need for peak performance.

With us, you’ll find the right brake line kit for your vehicle and get exactly what you expect: high-quality materials, excellent performance, and visually striking brake lines.

We use only stainless steel components for all parts of our lines—unlike other manufacturers, who use steel fittings that rust over time and pose a safety risk.

Choose your desired color and click “Add to Cart” to order your HEL brake lines.

 

HEL Performance offers brake line kits with so-called “alternative routing” options, including those with ABE certification!

For many models, we offer various routing options:

OEM, like the original (Standard Kit): The brake lines match an original replacement part in length, number, and routing.

Alternatively, Full Length: Two lines routed directly from the brake master cylinder—one to the right and one to the left—to the brake calipers.

Alternatively, Over the Mudguard: One line runs directly from the brake master cylinder to the right brake caliper; the second runs from there over the mudguard to the left brake caliper.

HEL Performance - Always No. 1 - What's Stopping You?

You can also find additional information and instructions in the “Package Contents” tab, as well as in the “Questions and Answers”section    
-

 

from 252,00CHF / Set
incl. 8,1% VAT plus 12,00CHF DHL-Shipping
Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days!Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days! **
24 months statutory warranty
product details
HEL ZyKo steel flex oil line - Suzuki GSF600 / GSF1200 Bandit - 2 Line Cam Kit (-) (1996-2005) - 4
HEL ZyKo steel flex oil line - Suzuki GSF600 / GSF1200 Bandit - 2 Line Cam Kit (-) (1996-2005) - 4
article nr.HBF7143

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

 

Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
  Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!!
 *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread.
#LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL

with ABE, parts certificate or technical certificate for special conversions
 

Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project!
Note: No ABE is required for clutch lines!
#FitAndRide

Stainless steel connections, at no extra charge, can be twisted at any time
 

No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!!
Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car!
#EasyMount #NoCompromizes

PVC coating at no extra charge!

  Already included in the price, PVC coating in up to 14 different colors freely selectable.
#BetterOptic

Custom-fit cable kits !
 

Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs
#EasyMount #YouGetWhatYouNeed

Precise pressure point, better modulation of the brake system
 

Better modulation and a precise pressure point give you completely new control over the entire braking process!
#RideTheBestYouCan

Development and production of all connecting parts at HEL in England!
 

HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company.
#NoCompromize

Production of the lines in Germany (Made in Germany)
 

Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered.
#SafetyFirst

Motorsport proven technology
 

Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality!
#RideTheBestYouCan #RideHEL #TeamHEL

 

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

 

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

HEL Performance - Always No.1 - What's Stopping You?

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

 

Price on request
product details
Braided steel brake line HEL - Suzuki GSF1200 T - Y Bandit (GV75A) (1996-2000) - Front wheel - 2-piece, (F) Full Length (w. ABE)
Braided steel brake line HEL - Suzuki GSF1200 T - Y Bandit (GV75A) (1996-2000) - Front wheel - 2-piece, (F) Full Length (w. ABE)
article nr.HBF7145

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

 

Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
  Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!!
 *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread.
#LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL

with ABE, parts certificate or technical certificate for special conversions
 

Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project!
Note: No ABE is required for clutch lines!
#FitAndRide

Stainless steel connections, at no extra charge, can be twisted at any time
 

No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!!
Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car!
#EasyMount #NoCompromizes

PVC coating at no extra charge!

  Already included in the price, PVC coating in up to 14 different colors freely selectable.
#BetterOptic

Custom-fit cable kits !
 

Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs
#EasyMount #YouGetWhatYouNeed

Precise pressure point, better modulation of the brake system
 

Better modulation and a precise pressure point give you completely new control over the entire braking process!
#RideTheBestYouCan

Development and production of all connecting parts at HEL in England!
 

HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company.
#NoCompromize

Production of the lines in Germany (Made in Germany)
 

Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered.
#SafetyFirst

Motorsport proven technology
 

Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality!
#RideTheBestYouCan #RideHEL #TeamHEL

 

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

 

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

HEL Performance - Always No.1 - What's Stopping You?

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

 

from 114,00CHF / Set
incl. 8,1% VAT plus 12,00CHF DHL-Shipping
Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days!Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days! **
24 months statutory warranty
product details
Braided steel brake line HEL - Suzuki GSF1200 T - Y Bandit (GV75A) (1996-2000) - rear wheel - 1-piece, (HR) as original (with ABE)
Braided steel brake line HEL - Suzuki GSF1200 T - Y Bandit (GV75A) (1996-2000) - rear wheel - 1-piece, (HR) as original (with ABE)
article nr.HBR7145

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

 

Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
  Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!!
 *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread.
#LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL

with ABE, parts certificate or technical certificate for special conversions
 

Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project!
Note: No ABE is required for clutch lines!
#FitAndRide

Stainless steel connections, at no extra charge, can be twisted at any time
 

No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!!
Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car!
#EasyMount #NoCompromizes

PVC coating at no extra charge!

  Already included in the price, PVC coating in up to 14 different colors freely selectable.
#BetterOptic

Custom-fit cable kits !
 

Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs
#EasyMount #YouGetWhatYouNeed

Precise pressure point, better modulation of the brake system
 

Better modulation and a precise pressure point give you completely new control over the entire braking process!
#RideTheBestYouCan

Development and production of all connecting parts at HEL in England!
 

HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company.
#NoCompromize

Production of the lines in Germany (Made in Germany)
 

Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered.
#SafetyFirst

Motorsport proven technology
 

Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality!
#RideTheBestYouCan #RideHEL #TeamHEL

 

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

 

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

HEL Performance - Always No.1 - What's Stopping You?

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

 

from 57,00CHF
incl. 8,1% VAT plus 12,00CHF DHL-Shipping
Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days!Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days! **
24 months statutory warranty
product details
Braided steel brake line HEL - Suzuki GSF1200SA Bandit ABS (GV75A) (1996-2000) - VR+HR - 8-pcs., (S) as original (w. ABE)
Braided steel brake line HEL - Suzuki GSF1200SA Bandit ABS (GV75A) (1996-2000) - VR+HR - 8-pcs., (S) as original (w. ABE)
article nr.HBF7145-ABS

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!!
 *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread.
#LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL

with ABE, parts certificate or technical certificate for special conversions

Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project!
Note: No ABE is required for clutch lines!
#FitAndRide

Stainless steel connections, at no extra charge, can be twisted at any time

No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!!
Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car!
#EasyMount #NoCompromizes

PVC coating at no extra charge!

Already included in the price, PVC coating in up to 14 different colors freely selectable.
#BetterOptic

Custom-fit cable kits !

Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs
#EasyMount #YouGetWhatYouNeed

Precise pressure point, better modulation of the brake system

Better modulation and a precise pressure point give you completely new control over the entire braking process!
#RideTheBestYouCan

Development and production of all connecting parts at HEL in England!

HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company.
#NoCompromize

Production of the lines in Germany (Made in Germany)

Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered.
#SafetyFirst

Motorsport proven technology

Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality!
#RideTheBestYouCan #RideHEL #TeamHEL

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

HEL Performance - Always No.1 - What's Stopping You?

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

from 405,00CHF / Set
incl. 8,1% VAT plus 12,00CHF DHL-Shipping
Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days!Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days! **
24 months statutory warranty
product details
Steel flex clutch line HEL - Suzuki GSF1200 T-Y Bandit (GV75A) (1996-2000) - Clutch - 1-piece, (CL)
Steel flex clutch line HEL - Suzuki GSF1200 T-Y Bandit (GV75A) (1996-2000) - Clutch - 1-piece, (CL)
article nr.HBC7145

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

 

Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
  Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!!
 *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread.
#LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL

with ABE, parts certificate or technical certificate for special conversions
 

Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project!
Note: No ABE is required for clutch lines!
#FitAndRide

Stainless steel connections, at no extra charge, can be twisted at any time
 

No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!!
Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car!
#EasyMount #NoCompromizes

PVC coating at no extra charge!

  Already included in the price, PVC coating in up to 14 different colors freely selectable.
#BetterOptic

Custom-fit cable kits !
 

Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs
#EasyMount #YouGetWhatYouNeed

Precise pressure point, better modulation of the brake system
 

Better modulation and a precise pressure point give you completely new control over the entire braking process!
#RideTheBestYouCan

Development and production of all connecting parts at HEL in England!
 

HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company.
#NoCompromize

Production of the lines in Germany (Made in Germany)
 

Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered.
#SafetyFirst

Motorsport proven technology
 

Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality!
#RideTheBestYouCan #RideHEL #TeamHEL

 

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

 

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

HEL Performance - Always No.1 - What's Stopping You?

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

 

from 67,00CHF / Set
incl. 8,1% VAT plus 12,00CHF DHL-Shipping
Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days!Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days! **
24 months statutory warranty
product details
Braided steel brake line HEL - Suzuki GSF1200 T - Y Bandit (GV75A) (1996-2000) - front wheel - 3-piece, (S) as original (with ABE)
Braided steel brake line HEL - Suzuki GSF1200 T - Y Bandit (GV75A) (1996-2000) - front wheel - 3-piece, (S) as original (with ABE)
article nr.HBF7152

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

 

Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
  Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!!
 *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread.
#LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL

with ABE, parts certificate or technical certificate for special conversions
 

Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project!
Note: No ABE is required for clutch lines!
#FitAndRide

Stainless steel connections, at no extra charge, can be twisted at any time
 

No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!!
Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car!
#EasyMount #NoCompromizes

PVC coating at no extra charge!

  Already included in the price, PVC coating in up to 14 different colors freely selectable.
#BetterOptic

Custom-fit cable kits !
 

Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs
#EasyMount #YouGetWhatYouNeed

Precise pressure point, better modulation of the brake system
 

Better modulation and a precise pressure point give you completely new control over the entire braking process!
#RideTheBestYouCan

Development and production of all connecting parts at HEL in England!
 

HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company.
#NoCompromize

Production of the lines in Germany (Made in Germany)
 

Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered.
#SafetyFirst

Motorsport proven technology
 

Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality!
#RideTheBestYouCan #RideHEL #TeamHEL

 

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

 

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

HEL Performance - Always No.1 - What's Stopping You?

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

 

from 165,00CHF / Set
incl. 8,1% VAT plus 12,00CHF DHL-Shipping
Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days!Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days! **
24 months statutory warranty
product details
Braided steel brake line HEL - Suzuki GSF1200 T - Y Bandit (GV75A) (1996-2000) - rear wheel - 1-piece, (HR) as original (with ABE)
Braided steel brake line HEL - Suzuki GSF1200 T - Y Bandit (GV75A) (1996-2000) - rear wheel - 1-piece, (HR) as original (with ABE)
article nr.HBR7152

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

 

Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
  Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!!
 *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread.
#LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL

with ABE, parts certificate or technical certificate for special conversions
 

Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project!
Note: No ABE is required for clutch lines!
#FitAndRide

Stainless steel connections, at no extra charge, can be twisted at any time
 

No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!!
Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car!
#EasyMount #NoCompromizes

PVC coating at no extra charge!

  Already included in the price, PVC coating in up to 14 different colors freely selectable.
#BetterOptic

Custom-fit cable kits !
 

Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs
#EasyMount #YouGetWhatYouNeed

Precise pressure point, better modulation of the brake system
 

Better modulation and a precise pressure point give you completely new control over the entire braking process!
#RideTheBestYouCan

Development and production of all connecting parts at HEL in England!
 

HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company.
#NoCompromize

Production of the lines in Germany (Made in Germany)
 

Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered.
#SafetyFirst

Motorsport proven technology
 

Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality!
#RideTheBestYouCan #RideHEL #TeamHEL

 

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

 

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

HEL Performance - Always No.1 - What's Stopping You?

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

 

from 57,00CHF / Set
incl. 8,1% VAT plus 12,00CHF DHL-Shipping
Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days!Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days! **
24 months statutory warranty
product details
Braided steel brake line HEL - Suzuki GSF1200 T - Y Bandit (GV75A) (1996-2000) - front wheel - 2-piece, (S) as original (with ABE)
Braided steel brake line HEL - Suzuki GSF1200 T - Y Bandit (GV75A) (1996-2000) - front wheel - 2-piece, (S) as original (with ABE)
article nr.HBF7153

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

 

Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
  Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!!
 *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread.
#LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL

with ABE, parts certificate or technical certificate for special conversions
 

Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project!
Note: No ABE is required for clutch lines!
#FitAndRide

Stainless steel connections, at no extra charge, can be twisted at any time
 

No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!!
Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car!
#EasyMount #NoCompromizes

PVC coating at no extra charge!

  Already included in the price, PVC coating in up to 14 different colors freely selectable.
#BetterOptic

Custom-fit cable kits !
 

Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs
#EasyMount #YouGetWhatYouNeed

Precise pressure point, better modulation of the brake system
 

Better modulation and a precise pressure point give you completely new control over the entire braking process!
#RideTheBestYouCan

Development and production of all connecting parts at HEL in England!
 

HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company.
#NoCompromize

Production of the lines in Germany (Made in Germany)
 

Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered.
#SafetyFirst

Motorsport proven technology
 

Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality!
#RideTheBestYouCan #RideHEL #TeamHEL

 

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

 

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

HEL Performance - Always No.1 - What's Stopping You?

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

 

from 114,00CHF
incl. 8,1% VAT plus 12,00CHF DHL-Shipping
Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days!Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days! **
24 months statutory warranty
product details
Braided steel brake line HEL - Suzuki GSF1200 T - Y Bandit (GV75A) (1996-2000) - rear wheel - 1-piece, (HR) as original (with ABE)
Braided steel brake line HEL - Suzuki GSF1200 T - Y Bandit (GV75A) (1996-2000) - rear wheel - 1-piece, (HR) as original (with ABE)
article nr.HBR7153

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

 

Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
  Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!!
 *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread.
#LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL

with ABE, parts certificate or technical certificate for special conversions
 

Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project!
Note: No ABE is required for clutch lines!
#FitAndRide

Stainless steel connections, at no extra charge, can be twisted at any time
 

No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!!
Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car!
#EasyMount #NoCompromizes

PVC coating at no extra charge!

  Already included in the price, PVC coating in up to 14 different colors freely selectable.
#BetterOptic

Custom-fit cable kits !
 

Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs
#EasyMount #YouGetWhatYouNeed

Precise pressure point, better modulation of the brake system
 

Better modulation and a precise pressure point give you completely new control over the entire braking process!
#RideTheBestYouCan

Development and production of all connecting parts at HEL in England!
 

HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company.
#NoCompromize

Production of the lines in Germany (Made in Germany)
 

Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered.
#SafetyFirst

Motorsport proven technology
 

Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality!
#RideTheBestYouCan #RideHEL #TeamHEL

 

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

 

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

HEL Performance - Always No.1 - What's Stopping You?

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

 

from 57,00CHF
incl. 8,1% VAT plus 12,00CHF DHL-Shipping
Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days!Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days! **
24 months statutory warranty
product details
Braided steel brake line HEL - Suzuki GSF400 M - R Bandit Single Disc (GK75B) (1991-1995) - front wheel - 2-piece, (S) as original (w. ABE)
Braided steel brake line HEL - Suzuki GSF400 M - R Bandit Single Disc (GK75B) (1991-1995) - front wheel - 2-piece, (S) as original (w. ABE)
article nr.HBF7168

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

 

Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
  Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!!
 *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread.
#LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL

with ABE, parts certificate or technical certificate for special conversions
 

Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project!
Note: No ABE is required for clutch lines!
#FitAndRide

Stainless steel connections, at no extra charge, can be twisted at any time
 

No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!!
Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car!
#EasyMount #NoCompromizes

PVC coating at no extra charge!

  Already included in the price, PVC coating in up to 14 different colors freely selectable.
#BetterOptic

Custom-fit cable kits !
 

Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs
#EasyMount #YouGetWhatYouNeed

Precise pressure point, better modulation of the brake system
 

Better modulation and a precise pressure point give you completely new control over the entire braking process!
#RideTheBestYouCan

Development and production of all connecting parts at HEL in England!
 

HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company.
#NoCompromize

Production of the lines in Germany (Made in Germany)
 

Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered.
#SafetyFirst

Motorsport proven technology
 

Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality!
#RideTheBestYouCan #RideHEL #TeamHEL

 

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

 

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

HEL Performance - Always No.1 - What's Stopping You?

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

 

from 114,00CHF / Set
incl. 8,1% VAT plus 12,00CHF DHL-Shipping
Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days!Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days! **
24 months statutory warranty
product details
Braided steel brake line HEL - Suzuki GSF400 M - R Bandit Single Disc (GK75B) (1991-1995) - rear wheel - 1-piece, (HR) as original (with ABE)
Braided steel brake line HEL - Suzuki GSF400 M - R Bandit Single Disc (GK75B) (1991-1995) - rear wheel - 1-piece, (HR) as original (with ABE)
article nr.HBR7168

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

 

Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
  Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!!
 *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread.
#LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL

with ABE, parts certificate or technical certificate for special conversions
 

Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project!
Note: No ABE is required for clutch lines!
#FitAndRide

Stainless steel connections, at no extra charge, can be twisted at any time
 

No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!!
Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car!
#EasyMount #NoCompromizes

PVC coating at no extra charge!

  Already included in the price, PVC coating in up to 14 different colors freely selectable.
#BetterOptic

Custom-fit cable kits !
 

Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs
#EasyMount #YouGetWhatYouNeed

Precise pressure point, better modulation of the brake system
 

Better modulation and a precise pressure point give you completely new control over the entire braking process!
#RideTheBestYouCan

Development and production of all connecting parts at HEL in England!
 

HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company.
#NoCompromize

Production of the lines in Germany (Made in Germany)
 

Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered.
#SafetyFirst

Motorsport proven technology
 

Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality!
#RideTheBestYouCan #RideHEL #TeamHEL

 

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

 

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

HEL Performance - Always No.1 - What's Stopping You?

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

 

from 57,00CHF / Set
incl. 8,1% VAT plus 12,00CHF DHL-Shipping
Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days!Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days! **
24 months statutory warranty
product details
Braided steel brake line HEL - Suzuki GSF600 S - T - X Bandit (GN77B) (1995-1999) - front wheel - 3-piece, (S) as original (w. ABE)
Braided steel brake line HEL - Suzuki GSF600 S - T - X Bandit (GN77B) (1995-1999) - front wheel - 3-piece, (S) as original (w. ABE)
article nr.HBF7174

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

 

Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
  Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!!
 *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread.
#LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL

with ABE, parts certificate or technical certificate for special conversions
 

Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project!
Note: No ABE is required for clutch lines!
#FitAndRide

Stainless steel connections, at no extra charge, can be twisted at any time
 

No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!!
Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car!
#EasyMount #NoCompromizes

PVC coating at no extra charge!

  Already included in the price, PVC coating in up to 14 different colors freely selectable.
#BetterOptic

Custom-fit cable kits !
 

Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs
#EasyMount #YouGetWhatYouNeed

Precise pressure point, better modulation of the brake system
 

Better modulation and a precise pressure point give you completely new control over the entire braking process!
#RideTheBestYouCan

Development and production of all connecting parts at HEL in England!
 

HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company.
#NoCompromize

Production of the lines in Germany (Made in Germany)
 

Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered.
#SafetyFirst

Motorsport proven technology
 

Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality!
#RideTheBestYouCan #RideHEL #TeamHEL

 

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

 

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

HEL Performance - Always No.1 - What's Stopping You?

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

 

from 165,00CHF / Set
incl. 8,1% VAT plus 12,00CHF DHL-Shipping
Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days!Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days! **
24 months statutory warranty
product details
Braided steel brake line HEL - Suzuki GSF600 S - T - X Bandit (GN77B) (1995-1999) - rear wheel - 1-piece, (HR) as original (with ABE)
Braided steel brake line HEL - Suzuki GSF600 S - T - X Bandit (GN77B) (1995-1999) - rear wheel - 1-piece, (HR) as original (with ABE)
article nr.HBR7174

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

 

Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
  Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!!
 *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread.
#LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL

with ABE, parts certificate or technical certificate for special conversions
 

Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project!
Note: No ABE is required for clutch lines!
#FitAndRide

Stainless steel connections, at no extra charge, can be twisted at any time
 

No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!!
Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car!
#EasyMount #NoCompromizes

PVC coating at no extra charge!

  Already included in the price, PVC coating in up to 14 different colors freely selectable.
#BetterOptic

Custom-fit cable kits !
 

Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs
#EasyMount #YouGetWhatYouNeed

Precise pressure point, better modulation of the brake system
 

Better modulation and a precise pressure point give you completely new control over the entire braking process!
#RideTheBestYouCan

Development and production of all connecting parts at HEL in England!
 

HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company.
#NoCompromize

Production of the lines in Germany (Made in Germany)
 

Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered.
#SafetyFirst

Motorsport proven technology
 

Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality!
#RideTheBestYouCan #RideHEL #TeamHEL

 

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

 

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

HEL Performance - Always No.1 - What's Stopping You?

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

 

from 57,00CHF / Set
incl. 8,1% VAT plus 12,00CHF DHL-Shipping
Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days!Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days! **
24 months statutory warranty
product details
Braided steel brake line HEL - Suzuki GSF600 S - T - X Bandit (GN77B) (1995-1999) - Front wheel - 2-piece, (F) Full Length (w. ABE)
Braided steel brake line HEL - Suzuki GSF600 S - T - X Bandit (GN77B) (1995-1999) - Front wheel - 2-piece, (F) Full Length (w. ABE)
article nr.HBF7175

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

 

Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
  Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!!
 *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread.
#LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL

with ABE, parts certificate or technical certificate for special conversions
 

Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project!
Note: No ABE is required for clutch lines!
#FitAndRide

Stainless steel connections, at no extra charge, can be twisted at any time
 

No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!!
Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car!
#EasyMount #NoCompromizes

PVC coating at no extra charge!

  Already included in the price, PVC coating in up to 14 different colors freely selectable.
#BetterOptic

Custom-fit cable kits !
 

Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs
#EasyMount #YouGetWhatYouNeed

Precise pressure point, better modulation of the brake system
 

Better modulation and a precise pressure point give you completely new control over the entire braking process!
#RideTheBestYouCan

Development and production of all connecting parts at HEL in England!
 

HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company.
#NoCompromize

Production of the lines in Germany (Made in Germany)
 

Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered.
#SafetyFirst

Motorsport proven technology
 

Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality!
#RideTheBestYouCan #RideHEL #TeamHEL

 

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

 

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

HEL Performance - Always No.1 - What's Stopping You?

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

 

from 114,00CHF / Set
incl. 8,1% VAT plus 12,00CHF DHL-Shipping
Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days!Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days! **
24 months statutory warranty
product details
Braided steel brake line HEL - Suzuki GSF600 S - T - X Bandit (GN77B) (1995-1999) - rear wheel - 1-piece, (HR) as original (with ABE)
Braided steel brake line HEL - Suzuki GSF600 S - T - X Bandit (GN77B) (1995-1999) - rear wheel - 1-piece, (HR) as original (with ABE)
article nr.HBR7175

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

 

Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
  Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!!
 *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread.
#LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL

with ABE, parts certificate or technical certificate for special conversions
 

Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project!
Note: No ABE is required for clutch lines!
#FitAndRide

Stainless steel connections, at no extra charge, can be twisted at any time
 

No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!!
Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car!
#EasyMount #NoCompromizes

PVC coating at no extra charge!

  Already included in the price, PVC coating in up to 14 different colors freely selectable.
#BetterOptic

Custom-fit cable kits !
 

Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs
#EasyMount #YouGetWhatYouNeed

Precise pressure point, better modulation of the brake system
 

Better modulation and a precise pressure point give you completely new control over the entire braking process!
#RideTheBestYouCan

Development and production of all connecting parts at HEL in England!
 

HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company.
#NoCompromize

Production of the lines in Germany (Made in Germany)
 

Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered.
#SafetyFirst

Motorsport proven technology
 

Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality!
#RideTheBestYouCan #RideHEL #TeamHEL

 

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

 

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

HEL Performance - Always No.1 - What's Stopping You?

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

 

from 57,00CHF
incl. 8,1% VAT plus 12,00CHF DHL-Shipping
Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days!Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days! **
24 months statutory warranty
product details
Braided steel brake line HEL - Suzuki GSF600 Y-K4 Bandit (WVA8) (2000-2004) - front wheel - 3-piece, (S) as original (with ABE)
Braided steel brake line HEL - Suzuki GSF600 Y-K4 Bandit (WVA8) (2000-2004) - front wheel - 3-piece, (S) as original (with ABE)
article nr.HBF7188

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

 

Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
  Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!!
 *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread.
#LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL

with ABE, parts certificate or technical certificate for special conversions
 

Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project!
Note: No ABE is required for clutch lines!
#FitAndRide

Stainless steel connections, at no extra charge, can be twisted at any time
 

No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!!
Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car!
#EasyMount #NoCompromizes

PVC coating at no extra charge!

  Already included in the price, PVC coating in up to 14 different colors freely selectable.
#BetterOptic

Custom-fit cable kits !
 

Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs
#EasyMount #YouGetWhatYouNeed

Precise pressure point, better modulation of the brake system
 

Better modulation and a precise pressure point give you completely new control over the entire braking process!
#RideTheBestYouCan

Development and production of all connecting parts at HEL in England!
 

HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company.
#NoCompromize

Production of the lines in Germany (Made in Germany)
 

Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered.
#SafetyFirst

Motorsport proven technology
 

Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality!
#RideTheBestYouCan #RideHEL #TeamHEL

 

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

 

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

HEL Performance - Always No.1 - What's Stopping You?

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

 

from 165,00CHF / Set
incl. 8,1% VAT plus 12,00CHF DHL-Shipping
Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days!Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days! **
24 months statutory warranty
product details
Braided steel brake line HEL - Suzuki GSF600 Y-K4 Bandit (WVA8) (2000-2004) - rear wheel - 1-piece, (HR) as original (with ABE)
Braided steel brake line HEL - Suzuki GSF600 Y-K4 Bandit (WVA8) (2000-2004) - rear wheel - 1-piece, (HR) as original (with ABE)
article nr.HBR7188

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

 

Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
  Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!!
 *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread.
#LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL

with ABE, parts certificate or technical certificate for special conversions
 

Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project!
Note: No ABE is required for clutch lines!
#FitAndRide

Stainless steel connections, at no extra charge, can be twisted at any time
 

No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!!
Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car!
#EasyMount #NoCompromizes

PVC coating at no extra charge!

  Already included in the price, PVC coating in up to 14 different colors freely selectable.
#BetterOptic

Custom-fit cable kits !
 

Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs
#EasyMount #YouGetWhatYouNeed

Precise pressure point, better modulation of the brake system
 

Better modulation and a precise pressure point give you completely new control over the entire braking process!
#RideTheBestYouCan

Development and production of all connecting parts at HEL in England!
 

HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company.
#NoCompromize

Production of the lines in Germany (Made in Germany)
 

Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered.
#SafetyFirst

Motorsport proven technology
 

Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality!
#RideTheBestYouCan #RideHEL #TeamHEL

 

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

 

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

HEL Performance - Always No.1 - What's Stopping You?

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

 

from 57,00CHF / Set
incl. 8,1% VAT plus 12,00CHF DHL-Shipping
Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days!Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days! **
24 months statutory warranty
product details
Braided steel brake hose HEL - Suzuki GSF600 Y-K4 Bandit (WVA8) (2000-2004) - Front wheel - 2-piece, (F) Full Length (w. ABE)
Braided steel brake hose HEL - Suzuki GSF600 Y-K4 Bandit (WVA8) (2000-2004) - Front wheel - 2-piece, (F) Full Length (w. ABE)
article nr.HBF7189

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

 

Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
  Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!!
 *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread.
#LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL

with ABE, parts certificate or technical certificate for special conversions
 

Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project!
Note: No ABE is required for clutch lines!
#FitAndRide

Stainless steel connections, at no extra charge, can be twisted at any time
 

No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!!
Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car!
#EasyMount #NoCompromizes

PVC coating at no extra charge!

  Already included in the price, PVC coating in up to 14 different colors freely selectable.
#BetterOptic

Custom-fit cable kits !
 

Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs
#EasyMount #YouGetWhatYouNeed

Precise pressure point, better modulation of the brake system
 

Better modulation and a precise pressure point give you completely new control over the entire braking process!
#RideTheBestYouCan

Development and production of all connecting parts at HEL in England!
 

HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company.
#NoCompromize

Production of the lines in Germany (Made in Germany)
 

Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered.
#SafetyFirst

Motorsport proven technology
 

Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality!
#RideTheBestYouCan #RideHEL #TeamHEL

 

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

 

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

HEL Performance - Always No.1 - What's Stopping You?

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

 

from 114,00CHF / Set
incl. 8,1% VAT plus 12,00CHF DHL-Shipping
Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days!Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days! **
24 months statutory warranty
product details
Braided steel brake line HEL - Suzuki GSF600 Y-K4 Bandit (WVA8) (2000-2004) - rear wheel - 1-piece, (HR) as original (with ABE)
Braided steel brake line HEL - Suzuki GSF600 Y-K4 Bandit (WVA8) (2000-2004) - rear wheel - 1-piece, (HR) as original (with ABE)
article nr.HBR7189

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

 

Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
  Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!!
 *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread.
#LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL

with ABE, parts certificate or technical certificate for special conversions
 

Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project!
Note: No ABE is required for clutch lines!
#FitAndRide

Stainless steel connections, at no extra charge, can be twisted at any time
 

No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!!
Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car!
#EasyMount #NoCompromizes

PVC coating at no extra charge!

  Already included in the price, PVC coating in up to 14 different colors freely selectable.
#BetterOptic

Custom-fit cable kits !
 

Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs
#EasyMount #YouGetWhatYouNeed

Precise pressure point, better modulation of the brake system
 

Better modulation and a precise pressure point give you completely new control over the entire braking process!
#RideTheBestYouCan

Development and production of all connecting parts at HEL in England!
 

HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company.
#NoCompromize

Production of the lines in Germany (Made in Germany)
 

Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered.
#SafetyFirst

Motorsport proven technology
 

Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality!
#RideTheBestYouCan #RideHEL #TeamHEL

 

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

 

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

HEL Performance - Always No.1 - What's Stopping You?

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

 

from 57,00CHF
incl. 8,1% VAT plus 12,00CHF DHL-Shipping
Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days!Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days! **
24 months statutory warranty
product details
Braided steel brake line HEL - Suzuki GSX1000 SD - SZ / GS1000 SD-SV Katana (GS1000) (1981-1984) - front wheel - 5-piece, (S) as original (w. ABE)
Braided steel brake line HEL - Suzuki GSX1000 SD - SZ / GS1000 SD-SV Katana (GS1000) (1981-1984) - front wheel - 5-piece, (S) as original (w. ABE)
article nr.HBF7200

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

 

Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
  Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!!
 *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread.
#LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL

with ABE, parts certificate or technical certificate for special conversions
 

Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project!
Note: No ABE is required for clutch lines!
#FitAndRide

Stainless steel connections, at no extra charge, can be twisted at any time
 

No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!!
Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car!
#EasyMount #NoCompromizes

PVC coating at no extra charge!

  Already included in the price, PVC coating in up to 14 different colors freely selectable.
#BetterOptic

Custom-fit cable kits !
 

Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs
#EasyMount #YouGetWhatYouNeed

Precise pressure point, better modulation of the brake system
 

Better modulation and a precise pressure point give you completely new control over the entire braking process!
#RideTheBestYouCan

Development and production of all connecting parts at HEL in England!
 

HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company.
#NoCompromize

Production of the lines in Germany (Made in Germany)
 

Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered.
#SafetyFirst

Motorsport proven technology
 

Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality!
#RideTheBestYouCan #RideHEL #TeamHEL

 

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

 

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

HEL Performance - Always No.1 - What's Stopping You?

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

 

from 265,00CHF / Set
incl. 8,1% VAT plus 12,00CHF DHL-Shipping
Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days!Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days! **
24 months statutory warranty
product details
Braided steel brake line HEL - Suzuki GSX1000 SD - SZ / GS1000 SD-SV Katana (GS1000) (1981-1984) - rear wheel - 1-piece, (HR) as original (w. ABE)
Braided steel brake line HEL - Suzuki GSX1000 SD - SZ / GS1000 SD-SV Katana (GS1000) (1981-1984) - rear wheel - 1-piece, (HR) as original (w. ABE)
article nr.HBR7200

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

 

Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
  Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!!
 *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread.
#LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL

with ABE, parts certificate or technical certificate for special conversions
 

Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project!
Note: No ABE is required for clutch lines!
#FitAndRide

Stainless steel connections, at no extra charge, can be twisted at any time
 

No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!!
Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car!
#EasyMount #NoCompromizes

PVC coating at no extra charge!

  Already included in the price, PVC coating in up to 14 different colors freely selectable.
#BetterOptic

Custom-fit cable kits !
 

Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs
#EasyMount #YouGetWhatYouNeed

Precise pressure point, better modulation of the brake system
 

Better modulation and a precise pressure point give you completely new control over the entire braking process!
#RideTheBestYouCan

Development and production of all connecting parts at HEL in England!
 

HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company.
#NoCompromize

Production of the lines in Germany (Made in Germany)
 

Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered.
#SafetyFirst

Motorsport proven technology
 

Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality!
#RideTheBestYouCan #RideHEL #TeamHEL

 

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

 

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

HEL Performance - Always No.1 - What's Stopping You?

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

 

from 57,00CHF / Set
incl. 8,1% VAT plus 12,00CHF DHL-Shipping
Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days!Ready for dispatch within 1–2 working days. Delivery time approx. 3–5 working days! **
24 months statutory warranty
product details
Displaying 2545 to 2568 (of 3982 products)