We Also Recommend
GMS brake line holder, 3D printing, flexible filament
The holder was designed to optimally attach brake lines to any fork or other tubes.
The holder and brake line are each attached with a separate cable tie.
Suitable for steel flex brake lines from HEL Performance
Use on lines and cables from other manufacturers may need to be tested.
Scope of delivery: 1 x holder
Material: Plastic (3D print)
Braided steel brake lines and kits from HEL Performance:
HEL-Performance® brake line kit, including banjo bolts** and accessories**
- No expansion of the lines at high temperatures
- eliminates the spongy feeling on the brake lever
- direct and precise braking point
- Teflon inner core with stainless steel sheathing
- only stainless steel connections
- Lower maintenance costs for the brake system
- Motorsport proven technology
* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:
www.help erformance.com/certification
The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.
(** is included, if required)
HEL-Performance®stainless steel adapter set for radial hand brake pumps
Incl. copper sealing rings and banjo bolt
This adapter set enables the installation of steel flex brake lines on radial handbrake pumps.
The problem is often that the connection is not accessible.
The adapter makes this possible.
To date, no ABE or registration has been required for this adapter. We therefore classify this part as "registration-free".
Please select one of the following screw combinations:
With two lines to the adapter:
1 x HS M10x1.00 1 x DHS M10x1.00
1 x HS M10x1.25 1 x DHS M10x1.00
With one line to the adapter:
1 x HS M10x1.25 1 x HS M10x1.00
2 x HS M10x1.00
The stainless steel adapter has 1 x internal thread M10x1.00!
Scope of delivery: 1 x stainless steel adapter, 1 x stainless steel banjo bolt 1 x stainless steel double banjo bolt (or 2 x banjo bolt), up to 5 x copper sealing ring
Braided steel brake lines and kits from HEL Performance:
HEL-Performance® brake line kit, including banjo bolts** and accessories**
- No expansion of the lines at high temperatures
- eliminates the spongy feeling on the brake lever
- direct and precise braking point
- Teflon inner core with stainless steel sheathing
- only stainless steel connections
- Lower maintenance costs for the brake system
- Motorsport proven technology
* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:
www.help erformance.com/certification
The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.
(** is included, if required)
HEL-Performance® Stainless Steel Adapter M14x1.25 Male Thread - M10x1.00 Female Thread
Package Contents: 1 x stainless steel adapter, 1 x M14x1.25 male thread, and 1 x M10x1.00 female thread
Material: Stainless steel
Weight: approx. 12 g
Steel-braided brake lines and kits from HEL Performance:
HEL-Performance® Brake Line Kit, including hollow screws** and accessories**
- No expansion of the lines at high temperatures
- Eliminates the spongy feeling on the brake lever
- Direct and precise braking response
- Teflon inner liner with stainless steel braiding
- Exclusively stainless steel fittings
- Lower maintenance costs for the braking system
- Technology proven in motorsports
* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:
www.helperformance.com/certification
The ABE is continuously updated. If your vehicle is not listed, or not yet listed, please contact us directly.
(** is included, if required)
HEL-Performance® Stainless Steel Reducer: M10x1.00 Male Thread to M8x0.75 Female Thread
This reducer fits, for example, the sensor of a Duacti Paniagale V4 on the rear brake line from the brake master cylinder to the ABS.
The stainless steel adapter has 1 x M8x0.75 female thread and 1 x M10x1.00 male thread!
Length: approx. 14 mm
Total length including male thread: approx. 22 mm
Package contents: 1 x stainless steel adapter
Steel-braided brake lines and kits from HEL Performance:
HEL-Performance® brake line kit, including hollow screws** and accessories**
- No line expansion at high temperatures
- Eliminates the spongy feeling in the brake lever
- Direct and precise braking response
- Teflon inner liner with stainless steel jacket
- Exclusively stainless steel fittings
- Lower maintenance costs for the braking system
- Technology proven in motorsports
* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:
www.helperformance.com/certification
The ABE is continuously updated. If your vehicle is not listed, or not yet listed, please contact us directly.
(** is included, if required)
HEL-Performance® Stainless Steel Adapter Set M10x1.00 Female/Male Threads
This adapter set allows ring fittings to be mounted on internal-threaded connections, such as those with a swivel nut
With connections featuring a floating nut, it is not possible to simply screw in a hollow screw. This would not provide a seal.
The adapter makes this possible because the external thread seals against the sealing cone at the bottom. The hollow screw is screwed into the internal thread and seals via a copper sealing ring (or aluminum, etc.)
The stainless steel adapter has 1 x M10x1.00 internal thread and 1 x M10x1.00 external thread!
Length: approx. 20 mm
Total length with external thread: approx. 31 mm
Package contents: 1 x stainless steel adapter
Stahlflex brake lines and kits from HEL Performance:
HEL-Performance® Brake Line Kit, including hollow screws** and accessories**
- No expansion of the lines at high temperatures
- Eliminates the spongy feeling in the brake lever
- Direct and precise braking response
- Teflon inner lining with stainless steel sheath
- Exclusively stainless steel fittings
- Lower maintenance costs for the braking system
- Technology proven in motorsports
* For information on availability and delivery with ABE or component certificates, please refer to the latest version of our ABE, which you can download here as a PDF file:
www.helperformance.com/certification
The ABE is updated on an ongoing basis. If your vehicle is not listed—or not yet listed—please contact us directly.
(** Included if required)
High-performance titanium-based lubricant in paste form.
This high-quality universal product covers the majority of all lubrication and corrosion problems from -180°C to +1,400°C. Free of nickel and aluminum, protects against corrosion, prevents seizing of screw connections and plug connections as well as vibration noises (e.g. brake squeal), resistant to seawater and most acids, alkalis, gases and vapors, abrasion-resistant, long-term corrosion protection, also prevents galvanic contact corrosion, pressure load up to max. 2,400 kp/cm² (= 23,400 N/cm²).
The real alternative to ceramic pastes and other "magic agents"!
Ideally suited for nuts and bolts that are either moved very frequently or only very rarely.
This high-performance lubricant is extremely temperature-resistant, up to +1400°C.
Exhaust and manifold bolts, wheel nuts/bolts, turbocharger bolts etc.
Is also recommended by the manufacturer for use on the back of disk brake pads (backing plate, outside) as an "anti-squeak"!
The carrier material (grease) contains titanium oxide particles.
As these are already oxidized, they cannot react further with oxygen.
Titanium oxide particles are extremely pressure-resistant and can withstand very high frictional forces.
Titanium oxide particles are virtually neutral towards all other metals. They are therefore also suitable for protecting critical materials against electrochemical corrosion.
The high-performance lubricant has proven its worth in extreme conditions, e.g. metals in seawater or in sewage treatment plants.
A MUST for every mechanic and motor sports enthusiast.
Scope of delivery:
1 bag of GMP-1004, content 4 grams (or when ordering 2 pieces = 1 double bag with 2 x 4 grams), color: dark grey
HEL-Performance® PVC Cable Guide 8-9 mm
A very practical solution for securely and safely attaching stainless steel flex hoses to an original Schaluch grommet. Also very helpful for securing a hose to a surface using plastic cable ties. This prevents damage to or pinching of the hose and its PVC protective jacket.
TIP: The PVC material of the small sleeve is relatively hard. This makes it easy to cut lengthwise and then slip over an existing hose. Because of the harder material, they won’t open on their own and hold very well on the hose. This is especially true when they are inserted into a mount. If necessary, glue them back together with superglue.
Alternatively, there is also a soft and flexible version available: HEL-GROMMET-W in our shop.
Contents: 1 x PVC cable guide
Approx. dimensions: L: 22 mm - O.D.: 13.5/16 mm - I.D.: 8 mm
Steel-braided brake lines and kits from HEL Performance:
HEL-Performance® brake line kit, including hollow screws** and accessories**
- No expansion of the lines at high temperatures
- Eliminates the spongy feeling in the brake lever
- Direct and precise braking response
- Teflon inner liner with stainless steel jacket
- Exclusively stainless steel fittings
- Lower maintenance costs for the braking system
- Technology proven in motorsports
* For information on availability and delivery with ABE or component certificates, please refer to the latest version of our ABE, which you can download here as a PDF file:
www.helperformance.com/certification
The ABE is continuously updated. If your vehicle is not listed—or not yet listed—please contact us directly.
(** is included, if required)
HEL-Performance® cable guide HLL-001
This cable guide originally comes from the passenger car sector. However, it can be used universally.
However, it cannot be retrofitted to a ready-made HEL brake line, as the connections are larger than the hole through the guide itself.
Scope of delivery: 1 x plastic cable guide
Approx. dimensions: L: 25.5mm - D-a: 16x16.5mm - D-i: 7.75 mm
Braided steel brake lines and kits from HEL Performance:
HEL-Performance® brake line kit, including banjo bolts** and accessories**
- no expansion of the lines at high temperatures
- eliminates the spongy feeling on the brake lever
- direct and precise braking point
- Teflon inner core with stainless steel sheathing
- only stainless steel connections
- Lower maintenance costs for the brake system
- Motorsport proven technology
* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:
www.help erformance.com/certification
The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.
(** is included, if required)
HEL-Performance® cable guide HLL-002
This cable guide originally comes from the passenger car sector. However, it can be used universally.
However, it cannot be retrofitted to a ready-made HEL brake line, as the connections are larger than the hole through the guide itself.
Scope of delivery: 1 x plastic cable guide
Approx. dimensions: L: 30.5mm - D-a: 18x22.5mm - D-i: 7.9 mm
Braided steel brake lines and kits from HEL Performance:
HEL-Performance® brake line kit, including banjo bolts** and accessories**
- no expansion of the lines at high temperatures
- eliminates the spongy feeling on the brake lever
- direct and precise braking point
- Teflon inner core with stainless steel sheathing
- only stainless steel connections
- Lower maintenance costs for the brake system
- Motorsport proven technology
* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:
www.help erformance.com/certification
The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.
(** is included, if required)
HEL-Performance® P-Clamp, 8–9 mm, stainless steel/rubber
Compatible with HEL Performance stainless steel braided hoses!
This P-clamp allows stainless steel braided hoses to be secured gently and securely.
It prevents damage or crushing of the line and PVC protective jacket.
Includes: 1 x P-clamp, inner diameter 9 mm
Material: Stainless steel with rubber protection,
Stainless steel braided brake lines and kits from HEL Performance:
HEL-Performance® brake line kit, including hollow screws** and accessories**
- No expansion of the lines at high temperatures
- Eliminates the spongy feeling at the brake lever
- Direct and precise bite
- Teflon inner liner with stainless steel jacket
- Exclusively stainless steel fittings
- Lower maintenance costs for the braking system
- Technology proven in motorsports
* For availability and delivery with ABE or parts certification, please refer to the latest version of our ABE, which you can download here as a PDF file:
www.helperformance.com/certification
The ABE is continuously updated. If your vehicle is not listed, or not yet included, please contact us directly.
(** is included, if required)
